Physics and Mechanics of New Materials and Their Applications, 2021 – 2022

$210.00

Ivan A. Parinov, DrSc – Chief Research Fellow, I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal University, Rostov-on-Don, Russia
Shun-Hsyung Chang, PhD – Professor, Department of Microelectronic Engineering, National Kaohsiung University of Science and Technology, Kaohsiung City, Taiwan Republic of China
Arkady N. Soloviev, DrSc – Professor, Don State Technical University, Rostov-on-Don, Russia

Series: Materials Science and Technologies
BISAC: MAT027000; SCI096000; SCI077000
DOI: 10.52305/QLWW2709

Target Audience: The book will be useful to students, PhD students, scientists and engineers, participating in R&D of a new generation of promising materials and composites.

The developing modern methods and approaches for studying advanced materials define the main vectors and topics for modern science and its applications. These investigations are based on strict mathematical and numerical methods, including modern approaches of mathematical modeling and physical experiments. They allow for direct improvement of material properties and characteristics of designed devices. These PHENMA 2021 – 2022 Proceedings are devoted to R&D of various actual problems divided into a framework of five scientific directions: (i) processing techniques; (ii) physics and mathematics; (iii) mechanics; (iv) applications and (v) industry and management of prospective materials.

This collection presents selected reports of the 10th Anniversary International Conference on “Physics and Mechanics of New Materials and Their Applications” (PHENMA 2021 – 2022), which took place in Divnomorsk, Russia, May 23 – 27, 2022, https://phenma2021.sfedu.ru/.

Table of Contents

Preface

Part 1. Processing Techniques

Chapter 1. Choice of Optimal Technological Procedures for the Manufacturing of Modified Bismuth Ferrite and Features of its Thermophysical Properties
S. I. Dudkina¹, S. N. Kallaev², K. P. Andryushin¹, S. V. Khasbulatov³, L. A. Shilkina¹, G. G.Gadjiev², S. Sahoo¹, I. A. Verbenko¹and L. A. Reznichenko¹
¹Southern Federal University, Research Institute of Physics, Rostov-on-Don, Russia
²Institute of Physics named after Kh. I. Amirkhanov DFRC RAS, Makhachkala, Russia
³Chechen State University named after A. A. Kadyrov, Grozny, Russia

Chapter 2. Synthesis, Grain Structure, and Properties of the 0.5BiFeO3 – 0.5PbFe0.5Nb0.5O3 Solid Solution
K. M. Zhidel and A. V. Pavlenko
Southern Federal University, Rostov-on-Don, Russia

Chapter 3. Use of Technogenic Raw Materials to Obtain Thermal Insulation Materials
N. I. Buravchuk¹, O. V. Guryanova¹ and Dr. Erni Puspanantasari Putri²
¹I. I. Vorovich Institute of Mathematics, Mechanics and Computer Science, Southern Federal University, Rostov-on-Don, Russia
²Department of Industrial Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Chapter 4. Modeling the Heating of Construction
A. V. Maistrenko
Don State Technical University, Rostov-on-Don, Russia

Chapter 5. A Study of the Recovery Technology for the Plastic Elements of Solid Waste Transportation Containers
S. I. Popov¹, E. E. Kosenko¹, Yu. V. Marchenko¹, A. V. Cherpakov¹,² and S. A. Zakharov¹
¹Don State Technical University, Rostov-on-Don, Russia
²Southern Federal University, Rostov-on-Don, Russia

Part 2. Physics and Mathematics

Chapter 6. A New Mixed-Layer Compound of the Aurivillius Phases with the Highest Phase Transition Temperature
S. V. Zubkov¹ and I. A. Parinov²
¹Research Institute of Physics, Southern Federal University, Rostov-on- Don, Russia
² I. Vorovich Mathematics, Mechanics and Computer Science Institute, Southern Federal University, Rostov-on-Don, Russia

Chapter 7. Problems of Anionic Impurities in Niobate Ferroelectric Materials
S. I. Dudkina, K. P. Andryushin, O. N. Razumovskaya, S. Sahoo, L. A. Shilkina, E. V. Glazunova, I. A. Verbenko and L. A. Reznichenko
Southern Federal University, Research Institute of Physics, Rostov-on-Don, Russia

Chapter 8. Dielectric Properties of a Multicomponent Ceramic Based on Sodium Potassium Niobate
E. V. Glazunova, L. A. Shilkina, A. V. Nagaenko, I. A. Verbenko and L. A. Reznichenko
Southern Federal University, Rostov-on-Don, Russia

Chapter 9. Features of the Structure and Physical Properties of Composite-Like Ceramics Based on Potassium Sodium Niobate
A. O. Denisova¹, Yu. V. Kabirov¹, S. E. Filippov² and A. G. Rudskaya¹
¹Southern Federal University, Rostov-on-Don, Russia
²Institute of High Technologies and Piezotechnics of Southern Federal University, Rostov-on-Don, Russia

Chapter 10. Structure and Dielectric Properties of Ba2NdFeNb4O15 Multiferroic Thin Film
D. V. Stryukov, Y. Y. Matyash, A. P. Kovtun, L. I. Kiseleva, G. N. Tolmachev and A. V. Pavlenko
Federal Research Centre The Southern Scientific Centre of the Russian Academy of Sciences, Rostov-on-Don, Russia

Chapter 11. Microstructure and Stability of Organic Coatings in a Sulfuric Acid Environment
S. P. Shpanko¹, E. N. Sidorenko¹ and D. A. Grineva²
¹Southern Federal University, Rostov-on-Don, Russia
²Academy of the Higher School of Business, Katowice, Poland

Chapter 12. Physicochemical Properties of Organic Films Obtained in Hydrochloric Acid
S. P. Shpank and E. N. Sidorenko
Southern Federal University, Rostov-on-Don, Russia

Chapter 13. A Note on Analytical Approaches in Ferroelectrics Switching Kinetics Modelling
Yu. E. Drobotov¹,² and B. G. Vakulov¹
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Russia

Chapter 14. New Abilities of Thermodynamic Calculations: Novel Energy Parameters Applications for a Ternary Reciprocal Systems Analysis
T. G. Lupeyko, D. V. Chirkova and A. N. Soloviev
Southern Federal University, Rostov-on-Don, Russia

Chapter 15. Modeling Acoustic Signals from Sources of Various Shapes with an Optoacoustic Effect in a Liquid
Denis A. Kravchuk¹, and Irina B. Starchenko²
¹Southern Federal University, Taganrog, Russia
²Parametrika LCC, Taganrog, Russia

Chapter 16. A Note on the Spaces of Bounded Riesz Potential-Type Operators of Variable Order
Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Vladikavkaz, Russia

Chapter 17. An Integral Equation of the First Kind with a Negative Power of the Laplacian
Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Russia

Chapter 18. A Convolution Integral Equation of the Third Kind in the Grand Lebesgue Spaces
Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Russia

Chapter 19. Hypersingular Integral Equation and Its Fundamental Solutions
G. S. Kostetskaya¹ and Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Russia

Part 3. Mechanics

Chapter 20. Construction of Kitagawa – Takahashi Diagram as a Function of Applied Stress Ratio
R. Sunder
BISS Division, ITW India (P) Ltd, Bangalore, India

Chapter 21. Stresses Due to Bending at Symmetric Notches of Hyperbolic Form with Arbitrary Focal Length
Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Vladikavkaz, Russia

Chapter 22. Spatial and Temporal Localization of Ultrasonic Effects Using Cylindrical Ultrasonic Standing Waves
N. A. Shvetsova¹, N. A. Kolpacheva², I. A. Shvetsov¹, S. A. Shcherbinin¹ and A. N. Rybyanets¹
¹Southern Federal University, Rostov-on-Don, Russia
²Don State Technical University, Rostov-on-Don, Russia

Chapter 23. Some Analytical Solutions to the Problem of Steady Longitudinal Oscillations of a Variable Density Rod
Yu. E. Drobotov¹,²
¹Southern Federal University, Rostov-on-Don, Russia
²North-Caucasus Center for Mathematical Research of the Vladikavkaz Scientific Centre of the Russian Academy of Sciences, Russia

Chapter 24. Vibration Diagnostics Hardware Design

A. V. Cherpakov¹,², I. A. Parinov¹ and K. G. Bukhanevich²
¹I. I. Vorovich Mathematics, Mechanics and Computer Science Institute, Southern Federal University, Rostov-on-Don, Russia
²Don State Technical University, Rostov-on-Don, Russia

Chapter 25. Modeling Vibrations of a High-Rise Building on a Rigid Foundation
A. V. Cherpakov¹,², V. E. Yakovlev¹ and S. G. Glushko²
¹I. I. Vorovich Mathematics, Mechanics and Computer Science Institute, Southern Federal University, Rostov-on-Don, Russia
²Don State Technical University, Rostov-on-Don, Russia

Chapter 26. An Analysis of The Effect of Pressure Load and Particle Size (mesh 200 – 350) on the Mechanical Properties of Polypropylene Reinforced Coal Ash (Bottom Ash) Composite
Gatut Priyo Utomo, Supardi, Ismail, I Made Kastiawan, Bimo Aji Setyawan and Nizar Rowandi
Mechanical Engineering, University of Surabaya, Surabaya, Indonesia

Part 4. Applications

Chapter 27. Research and Development of a Bimorph Piezoelectric Actuator for Sampling and Analysis of Blood Probes
I. A. Parinov¹, R. K. Haldkar¹, V. K. Gupta² and T. Sheorey²
¹I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal University, Rostov-on-Don, Russia
²Mechanical Engineering Discipline, PDPM Indian Institute of Information Technology Design and Manufacturing Jabalpur, India

Chapter 28. Modeling the Axial-Type Piezoelectric Generator with Proof Mass and Active Base
I. A. Parinov¹, A. V. Cherpakov¹,² and R. K. Haldkar¹
¹Southern Federal University, Rostov-on-Don, Russia
²Don State Technical University, Rostov-on-Don, Russia

Chapter 29. Design, Modeling, and Comparison of Energy Generators with Dual-Mode Piezoelectric Material
Rakesh Kumar Haldkar¹, I. A. Parinov¹, A. V. Cherpakov¹,² and Yu. E. Drobotov¹
¹I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal University, Rostov-on-Don, Russia
²Don State Technical University, Rostov-on-Don, Russia

Chapter 30. Multilevel Resistive Switching in Zinc Oxide Nanorods for Neuromorphic Applications
R. V. Tominov, Z. E. Vakulov and V. A. Smirnov
Department of Radioelectronics and Nanoelectronics, Institute of Nanotechnologies, Electronics and Electronic Equipment Engineering, Southern Federal University, Taganrog, Russia

Chapter 31. Improvement of Seals in the Flange Connections of Fountain Fittings and Shut-off Devices
M. I. Rodimova, H. K. Kaderov, S. O. Kireev and M. V. Korchagina
Don State Technical University, Rostov-on-Don, Russia

Chapter 32. The Use of Diagnostic Tools to Determine the Condition of the Nodes Responsible for the Safety of Vehicles
A. V. Lazarenko¹, O. Yu. Goncharov¹ and A. V. Cherpakov²,³
¹Coledge of Pyatigorsk Institute, North-Caucasian Federal University, Pyatigorsk, Russia
²Southern Federal University, Rostov-on-Don, Russia
³Don State Technical University, Rostov-on-Don, Russia

Chapter 33. Evaluation of the Reliability of Compressor Units in the Hyundai Air Conditioning System
O. Yu. Goncharov¹ and A. V. Cherpakov²,³
¹College of Pyatigorsk Institute, North-Caucasian Federal University, Pyatigorsk, Russia
²Southern Federal University, Rostov-on-Don, Russia
³Don State Technical University, Rostov-on-Don, Russia

Part 5. Industry and Management

Chapter 34. Performance Evaluation Using Input-Oriented Envelopment DEA Method: A Case Study of Micro and Small Industry in Indonesia
Dr. Erni Puspanantasari Putri, Zainal Arief and Istantyo Yuwono
Department of Industrial Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Chapter 35. Development Strategy of MSMEs Based on the Creative Economy
Dr. Erni Puspanantasari Putri
Department of Industrial Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Chapter 36. Development Strategy of Local Village Economies in Indonesia
Dr. Erni Puspanantasari Putri
Department of Industrial Engineering, Universitas 17 Agustus 1945 Surabaya, Indonesia

Chapter 37. Analysis of the Driving and Dependence Power of the Barriers to Implement ERPII in Indian SMEs
Inayat Ullah¹, Rakesh Kumar Haldkar², Ivan A. Parinov² and Sourabh Shukla¹
¹Department of Mechanical Engineering, G H Raisoni College of Engineering Nagpur, Maharashtra, India
²I. I. Vorovich Mathematics, Mechanics and Computer Sciences Institute, Southern Federal University, Rostov-on-Don, Russia

Chapter 38. Simulation Modeling of the Operational Process of Waste Processing Enterprise
A. V. Cherpakov¹,², Al-Kadhim Hasan Makki Hasan¹ and Khamis Modar¹
¹Don State Technical University, Rostov-on-Don
²South Federal University, Rostov-on-Don

Chapter 39. The Potential of Teakwood as a Climate Change Resilient Furnishing Material
R. A Retno Hastijanti and Briant Wiranata
Surabaya Zoo, Surabaya, Indonesia

Chapter 40. Creation of a Painting Sales Web Application
D. G. Kohan and G. B. Anisimova
Don State Technical University, Rostov-on-Don, Russia

Index

Publish with Nova Science Publishers

We publish over 800 titles annually by leading researchers from around the world. Submit a Book Proposal Now!